TTL Li-ion Round Head Camera Flash V1 adopts round flash head to offer studio-level soft and even light effects. With powerful functions and plentiful accessories, it is suitable for portrait photography, wedding photography, event photography, travel photography, still life photography, etc.
Xpro Series TTL Wireless Flash Trigger can not only control the flashes with built-in Godox wireless X system e.g. camera flashes, outdoor flashes and studio flashes, but also can control the flashes without Godox X system by 2.5mm sync cord jack. XProC/XProN/XProS/XProF/XProO separately applies to Canon, Nikon, Sony, FUJIFILM and Olympus/Panasonic series cameras.
With built-in Godox 2.4G Wirless X System and versatile using methods.
Using the 2.4 GHz Godox X wireless radio system, the XPro TTL Wireless Flash Trigger can be used to effectively and reliably trigger flashes from up to 328′ away, and when used with compatible flashes and receivers users will have the added benefit of remote power control. For ensuring maximum reliability and control, users can set up 16 groups on one of 32 channels and can then access 99 wireless ID settings for limiting interference from other nearby systems.
16 groups and 32 channels to wirelessly control and trigger. Add 01 to 99 wireless ID settings, which can only achieve triggering when the channels and wireless IDs of the master and slave unit are set to the same, avoiding signal interference effectively.
Especificações
Tecnical Data
Compatible cameras
V1C
Canon EOS cameras (E-TTL II autoflash)
V1N
Nikon cameras (i-TTL autoflash)
V1S
Sony cameras (TTL autoflash)
V1F
Fujifilm cameras (TTL autoflash)
V1O
Olympus/ Panasonic cameras (TTL autoflash)
V1P
Pentax cameras (TTL autoflash)
General information
Power(1/1 output)
76 Ws
Flash Coverage
28 to 105mm • Auto zoom (Flash coverage set automatically to match the lens focal length and image size) • Manual zoom • Swinging/tilting flash head (bounce flash): 0 to 330° horizontally and -7° to 120° vertically
Flash Duration
1/300 to 1/20000 seconds
Sync Triggering Mode
Hotshoe, 2.5mm sync cable
Color Temperature
5600K±200K
Exposure Control
Exposure control system
TTL autoflash and manual flash
Flash exposure compensation (FEC)
Manual. FEB: ±3 stops in 1/3 stop increments (Manual FEC and FEB can be combined)
Sync mode
High-speed sync (up to 1/8000 seconds), first-curtain sync, and second-curtain sync
Multi flash
Provided
Wireless Flash
Wireless flash function
Master, Slave, Off
Master groups
M, A, B, C (V1C: A, B, C, D)
Controllable slave groups
A, B, C, D, E (D/E group can be controlled by X series flash trigger). Godox V1C : A, B, C, D, E (E group can be controlled by X series flash trigger)
Transmission range (approx.)
100m
Channels
32 (1~32)
ID
01~99
Auto Focus Assist Beam
Effective range (approx.)
Center: 0.6~10m / 2.0~32.8 feet / Periphery: 0.6~5m / 2.0~16.4 feet (Note: V1O does not have this function.)
LED Modeling Lamp
Power
2W
Color Temperature
3300K±200K
Power Supply
Power Source
7.2V/2600mAh Li-ion battery
Recycle time
Approx 1.5 seconds. Green LED indicator will light up when the flash is ready.
Full power flashes
Approx. 480
Power saving
Power o ffautomatically after approx. 90 seconds of idle operation. (60 minutes if set as slave)
Dimensions
W x H x D
76 x 93 x 197mm
Weight without battery
420g
Weight with battery
530g
Tecnical Data
Compatible cameras
XPro C
Canon EOS cameras (E-TTL II autoflash) Support for the cameras that have PC sync socket.
XPro N
Nikon cameras (i-TTL autoflash) Support for the cameras that have PC sync socket.
XPro S
Sony cameras (TTL autoflash) Support for the cameras that have PC sync socket.
XPro F
FUJIFILM cameras (autoflash) Support for the cameras that have PC sync socket.
XPro O
Olympus/ Panasonic cameras (TTL autoflash) Support for the cameras that have PC sync socket.
XPro P
Pentax cameras (TTL autoflash)
Flash Exposure Control
TTL autoflash
yes
Manual flash
yes
Stroboscopic flash
yes
Function
High-speed sync
Yes
Second-curtain sync
Yes
Flash exposure compensation
Yes, ±3stops in 1/3 stop increments
Flash exposure lock
Yes
Focus assist
Yes
Modeling lamp
Control the modeling lamp by the flash trigger
Beeper
Control the beeper by the flash trigger
Wireless setting
The receiver end can control the camera shooting through the 2.5mm sync cord jack
ZOOM setting
Adjust the ZOOM value by the transmitter
TCM function
Transform the TTL shooting value into the output value in the M mode
Firmware upgrade
Upgrade through the Type-C USB port
Memory function
Settings will be stored 2 seconds after last operation and recover after a restart
Adicionar
